LEGO® Parts

Plate Round 1 x 2 Half Circle with Stud (Jumper)

Plate Special 1 x 1 with Hole Through Stud, 3 Bars and 3 Bar Holes

Plate Special 1 x 2 Side Handle [Free Ends]

Plate Special 2 x 2 with 2 Pin Holes

Plate Special 3 x 2 with Rounded End, Hole

Plate Special 1 x 4 with Towball

Plate 1 x 1 x 2/3 Half Round with Side Stud

Technic Plate 2 x 4 [3 Holes]

Technic Plate 2 x 8 [7 Holes]

Plate Special 1 x 2 with Ladder

Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version

Plate Special 1 x 8 with Door Rail

Plate Special 1 x 4 Offset with Bar Holes

Plate Special 1 x 2 with Long Stud Receptacle (Space Wing)

Plate Special 2 x 2 with Wheel Holders

Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]

Plate Special 2 x 2 with Wheels Holder Wide

Plate Special 6 x 12 with Studs on 3 Edges

Plate Special 4 x 4 with Studs on One Edge [Plain]

Plate Special 4 x 6 with Studs on 3 Edges

Bracket 1 x 2 - 1 x 4 [Rounded Corners]

Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]

Plate Special 1 x 2 with Pin Hole on Top

Plate Special 1 x 2 with Clip Horizontal on Side

Plate Special 1 x 2 with 5.9mm Centre Side Towball

Plate Special 1 x 2 5.9mm Towball Socket

Plate Special 1 x 2 with 5.9mm Towball Socket and Towball

Plate Special 1 x 2 5.9mm Centre Side Towball Socket

Plate Special 1 x 1 with Vertical Tooth

Plate 2 x 2 with 2 Pins

Plate Special 1 x 2 with Three Teeth [Tri-Tooth]

Plate Special 2 x 2 with Towball and Hole

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

Plate Special 8 x 9 x 2/3 with 1 x 4 Recessed

Plate Special 1 x 2 with Handles on Ends

Plate Special Round 2 x 2 with Center Stud (Jumper Plate)

Plate Special 1 x 2 with Pin Hole Underneath

Plate Special 1 x 1 with Stud, 3 Bars and 3 Bar Holes

Plate Special 1 x 2 with End Towball

Plate Special 1 x 1 Rounded with Handle

Plate Special 2 x 4 with 2 Pin Holes

Plate Special, 2 x 2 Studs and Handle, Closed Ends (Mech Chest Plate / Armor)

Plate Special 2 x 3 with Rocks

Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]

Plate Special 1 x 4 with Bar Down

Plate Special 2 x 4 with Pins

Plate Special / Shield Rectangular with 4 Studs, Handle

Plate Special 2 x 8 with Door Rail

Technic Plate 2 x 6 [5 Holes]

Plate Special 1 x 2 with Door Rail

Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L

Plate Special 2 x 2 with Only 2 studs

Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper)

Plate Special 4 x 4 Splat Gear, 10 Teeth

Plate Special 3 x 5 Cloud with 3 Center Studs

Bracket 1 x 1 - 1 x 1 Inverted

Bracket 1 x 1 - 1 x 1

Plate Special 1 x 2 with 1 Stud without Groove (Jumper)

Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]

Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]

Plate Special 1 x 1 with Clip Vertical [Thin U Clip]

Plate Special 8 x 8 with Grille [Hole in Center]

Bracket 2 x 2 with 1 x 2 Vertical Studs

Plate Special 1 x 4 with 2 Studs with Groove [New Underside]

Plate Special 2 x 2 with Grills

Bracket 1 x 2 - 2 x 2

Plate Special 1 x 2 [Open O Top Clip]

Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] [Old Type]

Plate Special 2 x 2 with Wheels Holder Wide - Technic Pins

Plate Special 1 x 2 [Side Handle Closed Ends]

Plate Special 1 x 1 with Tooth

Plate Special 1 x 2 with Handle on End [Closed Ends]

Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]

Plate Special 1 x 4 with Angled Tubes

Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]

Plate Special Round 8 x 8 with 2 x 2 Center Studs with Groove

Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center

Plate Special 1 x 2 with Clip Horizontal on End

Bracket 2 x 6 - 1 x 6 Inverted

Plate Special 4 x 4 with 2 x 2 Opening

Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)

Plate Special Round 2 x 2 with Melting Drops/Icing on Sides

Plate Special 4 x 4 with Studs on Edges and Clips Horizontal

Plate Special 1 x 2 with Wheel Holder, Reinforced Underside

Plate Special 10 x 16 with Studs on Edges and Bar Handles on 1 Side

Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale)

Plate 6 x 6 with 5 Center Holes

Bracket 1 x 1 - 1 x 2 Inverted

Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

Plate Special 2 x 6 with Wall Mount Hook

Plate Special 1 x 2 with Clip Vertical on End

Plate Special 1 x 1 with Handle on 2 Ends

Plate Round 1 x 1 with Hollow Stud and Bar on Underside - Long Space

Bracket 1 x 1 - 1 x 2

Plate Special 1 x 3 with 2 Clips on Top

Plate Special 2 x 2 with Groove and Center Stud (Jumper)